1 Hour Fire Rated Steel Stud Partition

A steel stud partition provides an efficient way to create internal fire compartment walls while maintaining a lightweight construction suitable for a wide range of building projects. It is commonly used where both fire resistance and ease of installation are important considerations.

The 1 Hour Fire Rated Steel Stud Partition supplied by PROSAFE, based on the selected design, is constructed using a single layer of 9mm PROMINA®-60 board fixed to both sides of a steel stud framework, complete with PROMINA®-60 cover strips over the board joints and mineral wool insulation within the cavity. When installed in accordance with the tested construction, the complete assembly has a nominal system thickness of 86mm.

Tested to BS 476 Part 22:1987 for non-loadbearing construction, the system provides 60 minutes of fire resistance from both sides and achieves a Fire Resistance Level (FRL) of -/60/60 when installed as the approved tested assembly.

Suitable for commercial, industrial, institutional and residential developments, this partition system provides a practical solution for creating fire compartments while supporting modern building requirements.

Provides up to 60 minutes of fire resistance from both sides.
Tested to BS 476 Part 22:1987 for non-loadbearing construction.
Lightweight partition system for efficient installation.
Time and cost effective construction solution.
Offers thermal resistance and impact resistance.
Suitable for both new construction and refurbishment projects.
Built using PROMINA®-60 fire resistant boards.

This system is designed as a non-loadbearing steel stud partition.
The tested assembly has a nominal system thickness of 86mm.
Where the partition height exceeds 4000mm, consult PROSAFE for the appropriate steel channel sizes.
Perimeter gaps between the boards and surrounding masonry should be sealed using PROMASEAL®-A Sealant where required to achieve the specified fire resistance and acoustic performance.
The complete system, including the steel framing, PROMINA®-60 boards, mineral wool insulation and associated components, should be installed in accordance with the approved tested assembly.
Refer to the PROMAT technical handbook and system drawings for complete installation requirements.

The 1 Hour Fire Rated Steel Stud Partition is suitable for a variety of building types, including:

Commercial buildings
Industrial facilities
Institutional buildings
Residential developments
High rise buildings
Refurbishment and restoration projects

Technical Specifications

Title	Description
Fire Resistance	60 Minutes
Fire Exposure	Both Sides
Fire Resistance Level	FRL -/60/60
Test Standard	BS 476 Part 22:1987 (Non-loadbearing)
Board	PROMINA®-60
System Type	Steel Stud Partition
System Thickness	Nominal 86mm
Applications	Commercial, Industrial, Institutional, Residential, High Rise and Refurbishment Projects
Acoustic Performance	STC 43 / Rw 43dB

Consult About This System

Back To System Page

Detailed Systems & Brochures

General Data

Handbook - Fire-Rated Partitions & External Wall Systems

General System Brochure

60 Minutes - Steel Stud Partition Wall

Frequently Asked Questions

Is this system tested?

Yes. This system has been tested to BS 476 Part 22:1987 for non-loadbearing construction and provides 60 minutes of fire resistance when installed in accordance with the tested assembly. It is supported by the relevant test documentation and is accepted for BOMBA submission where applicable.

Do fire rated systems require certificate renewal?

No. Building owners do not need to renew the fire test certification. The certification is maintained by the system manufacturer (PROMAT), while the installed system should always follow the tested assembly and manufacturer recommendations.

How much does this system cost?

The cost depends on factors such as the project size, partition dimensions and specification requirements. Contact PROSAFE for a project-specific quotation and technical advice here.

Why choose PROSAFE for passive fire protection systems?

PROSAFE supplies PROMAT fire rated systems that are rigid, lightweight, moisture resistant and supported by tested documentation. With a wide range of system options and practical technical support, we help make system selection easier for projects across Malaysia.

Can this partition be installed above 4 metres in height?

Yes. However, where the partition height exceeds 4000mm, the size of the steel channels should be determined in accordance with PROMAT recommendations. Contact PROSAFE for project-specific technical advice here.

Which side of the partition provides fire protection?

This system provides 60 minutes of fire resistance from both sides when installed in accordance with the approved tested assembly.